Technical Resource Hub

If your IAdea panel has the GoBright app pre-loaded but you no longer need to use it, you can either disable it in the application menu or completely remove the app.Please note: USB drives must be formatted as FAT32. NTFS is not supported.Please select the best option for you below: Option 1 - Disabling the GoBright App 1) When the IAdea panel starts to load, you will see a circle with a pause icon in the middle. Press this button and enter 010101 as the code2) On the Basic Settings page, swipe down 2 / 3 times from the top of the screen to bring up the menu and press the settings cog in the bottom-right corner of the menu3) Now you're in the Android interface, select Apps & Notifications and See All Apps4) Select GoBright - Device5) Force stop the app and acknowledge the pop-up6) Select Disable and confirm the pop-up again. Follow any further prompts after thisNow this page will change to show an option to enable GoBright again.Press the back arrow in the top-left corner a few times to return to the Android settings page. Now press the triangle in the bottom menu to return to the IAdea black settings screen.Plug in your relevant USB drive with the new .apk file you wish to install pre-loaded onto it. Swipe down a few times from the top of the screen and select the name of the USB drive and run the installer. Option 2 - Force Removing the GoBright App You may wish to completely remove the GoBright app from the panel. First of all, please take note of all of the following information:Model number (e.g. WRP1000-H)S/N of the unitOperating system (e.g Android 12)Firmware versionMAC address - this bit is important - we are unable to help without thisNOTE: Do not send photos of your S/N(s) or MAC(s) - please type them in the body of your email to Ascentae Support. It's your responsibility to provide the complete MAC address(es) as we cannot process photos.All of the above can be found by rebooting the unit and pressing the the pause icon to stop the device booting into GoBright and launching the IAdea back-end. Please enter 010101 as the code.Work your way through the tabs on the menu on the left. For example, you can find the serial number and model number under the Information tab.The Next StepsEnable remote monitoring. Now that you've carried out the above steps and made a note of the information in points 1-5 above, complete the following. Once remote monitoring has been enabled, IAdea will connect your device to their IAdeaCare servers.In the IAdea backend (see above) head to System > Remote MonitoringToggle on this optionWait for the 'initializing' message to appear and then 'waiting for connection'. Hang tight, it's processing any updatesYou will then be presented with 'pairing...' along with a pairing code shortly after. This will be 6 digits.Make a note of this pairing code and leave the panel on this page and switched on.Provide all information to Ascentae and the tech team will liase with the techs at IAdea.The full cycle after IAdea push the update through can take around 10-15 minutes to complete and may reboot several times throughout the process.After this process is complete, you have a blank panel as if it had just left the factory.NOTE: Once the device has been reset by IAdea it cannot be rolled back - you will permanently lose all configuration settingsIf you're using Wi-Fi, you will need to reconfigure your network connection settings under the Network tab on the Android Interface after the process is complete. To get to this interface, swipe down twice from the top of the screen on the black IAdea page and press the settings cog (bottom-right).You can now install any app you wish to use on your IAdea panel and the GoBright app no longer exists.IAdeaCareIAdeaCare is comprehensive device management for all deployed IAdea devices, including essential tools for deployment, management, ongoing maintenance, and troubleshooting. IAdeaCare consolidates operational data from all your devices into a single intuitive interface for in-depth analysis or quick at-a-glance viewing.Please speak to your Ascentae Account Manager for pricing.

Wi-Fi signal strength is measured in dBm, with values usually ranging from -30 dBm to -90 dBm. A value closer to 0 (e.g. -50 dBm) indicates a stronger, faster connection, while lower numbers (e.g. -80 dBm) indicates a weaker, slower, or unstable connection. -50 dBm to -60 dBm (Excellent/Good)-60 dBm to -70 dBm (Fair)-70 dBm to -80 dBm (Weak)-80 dBm to -90 dBm (Unusable)Walls and electronic interference will significantly drop the dBm value in your environment. Finding your dBm level on an InteractPress and hold the time in the top-right for a few secondsSelect open device infoHere you have 4 options on the left hand side. On this screen you can find:StatusIP addressMAC addressSSID Signal, channel and dBmAuth mode used (e.g WPA2 PSK)We need to concentrate on the 2nd option down - WiFi. There is a signal indicator that will fluctuate in real-time. Values between -50 dBm and -65 dBm are good.Important: Interacts operate on the 2.4 Ghz spectrum. 5 Ghz is not supported.Still having issues? Check out our on site install guide here.

This article has moved. Please click here to view the guide.

The Control Plug is the solution for managing the power usage for your GoBright Interact. The solution is to power on your desk workstation only when checked-in.Summary, key points & benefits:Supports a Bluetooth range of up to 15mUp to 5 Interacts can be connected to a single Control PlugThe firmware version on the Interact must be running 2.4.7 or aboveOnly available for Interacts - GoBright Connects are not supportedAvailable in UK, EU and USA versionsEnergy Savings: Automatically cuts power to desk peripherals (monitors, docking stations, etc.) when the desk is not in use, reducing your impact on the environmentBy requiring a check-in to activate power, it ensures more reliable desk occupancy data for facility managersClick here to view the extensive installation guide from GoBright to get up and running.

Solution Overview Multi-Camera SolutionFlexible meeting spaces require flexibility solutions to maximise performance.  A front facing camera may be suitable for regular meetings, but for presentation or teacher / student interaction, additional AV equipment should be considered. There are a number of solutions on the market which offer camera switching, but these can dramatically increase the price of the solution for minimal additional performance.For many spaces, all that’s required is multiple camera, and the ability to switch between them easily.  The addition of a ReThink AV auto switching matrix allows both the in-room PC and guest laptops to access the AV and simply switch to the desired camera within the UC client (Teams/Zoom etc). For additional ease of use, the matrix can be programmed to switch sources on a keyboard shortcut or integrated into a room control system. Up to 5 USB peripherals can be configured and dual screen output is fully supported to allow maximum performance and flexibility. Optionally, wireless sharing can be integrated with the in-room PC.  We recommend AirServer or Mersive solutions, or for customers who want to use a wireless dongle, the Maxhub WB05 provides wireless sharing without the need to install software or connect to a wifi hotspot.Key Benefits- One-touch join of Microsoft Teams meetings- Easily switch between USB peripherals within your UC client, via keyboard shortcut or via control system- Up to 5 USB peripherals can be installed- Dual screen support- Bring Your Own Meeting support connects screen and peripherals.  Host the meeting on your computer.- Auto switching to your computer as soon as you plug in- Single USB-C connects your computer for video, audio, data and network*.  Plus, it charges your battery!*Wired network connection required to ReThink switch. ·        Core Components-  Dual Maxhub ND65 CMA 65” displays ·        -  Huddly C1 All-in-one camera / mic / speaker system ·        -  Additional cameras (RocWare RC821 shown) ·        -  Additional audio system (if required – Nureva - HDL310 shown) ·       -  ReThink AV MatrixRAV-MS-4x2DLHU-Tx/Rx - ReThink active USB-C cableOptional Components for wireless sharing-  Mersive POD v4- AirServer Connect 3- MAXHUB WB05 + buttonThis example includes dual screens and a MAXHUB XCore Pro MTR.A Huddly C1 is provided for front of room camera and meeting audio.When switching to presenter mode, the RocWare RC821 PTZ camera is mounted at the rear of the room to capture the presenter.A Nureva HDL310 is included to provide whole room audio in presentation mode.A wireless keyboard & mouse are installed to allow quick switching between setups. The Mersive POD 4 provides wireless sharing via the MTRA USB-C cable connects to the ReThink matrix to allow laptops to access the solution and enable BYOM or local presentation.Connection Diagram

Enabling Map Viewer Hardware For Map Routing - On Site Installation Instructions1. Background In Q4 of 2025, GoBright launched a new routing feature for their mapping solution. This is for live directions to resources (rooms, desks, parking. lockers and spaces) on map viewers.2. TestingThe tech team at Ascentae have worked alongside the GoBright team and tested this extensively, and we're impressed with the functionality. This is a great addition to the GoBright platform.3. CommissioningIf you have purchased a commissioning package with us, we'll configure the portal remotely. However, there are some steps that on-site engineers will need to perform which cannot be carried out remotely. Please see sections 4 & 5.4. Important Info & Key PointsOnly V2 of the Map Viewer supports this functionality. If you're running V1, you'll need to switch.The Map Viewer must support WebView (enabled in developer mode).We'll guide you through this in the next section.5. Enabling WebView & V2This is a simple procedure and needs to be carried out in the Android settings on the device. Let's walk you through the steps.A) Close the GoBright application — instructions are here.B) Scroll down to the Application section and keep tapping Current Version until it says 'you're now a developer'.C) On the same page, look for Developer Tools and select Browser. Change the browser to WebView. If it's stuck on loading, don't worry. Press settings and reboot the panel from the options menu. Now that we've updated to WebView, let's flick the switch to the V2 of the map viewer.Switching to V2A) Log in to your GoBright portal here.B) Head to Settings > Devices > Profiles. Look for the Map Viewer profile — this is clear as it will show as a Map Viewer Display in the Type column. Select this profileC) Scroll down to the Map Viewer section and make sure the theme is set to Version 2. If the device is stuck on loading again after saving the changes, please reboot the unit.The Mobile AppAs of the 19th of January 2026, GoBright added their map routing solution on both Apple and Android devices that have their app installed.The GoBright app is available for free on both platforms. Just check out the relevant store for your device.A live working example: