When commissioning Interacts on site, these can only be commissioned via the GoBright App. Here's your initial quick checklist:✅ An Interact ✅ An admin account for the GoBright Portal ✅ A smartphone with the latest GoBright mobile app, logged in as an admin✅ An Interact profile (this is done the on portal)✅ If the devices sit behind a firewall, please ensure MQTT over TLS has been correctly configured.Please note: When using Wi-Fi:✅ 2.4 Ghz (supported)❌️ 5 Ghz (not supported)Now that all of the above are in place, please follow steps 1 to 3 on this article.Related Article:Hard-reset a GoBright Interact The full firewall rules can be found here.

How To Collect Logs From MAXHUB Screens Note: All of the pictures in this manual are for reference only, subject to available products. Published by MAXHUB on the 26th of November 2025. This document is a guide for the user to collect the logs from MAXHUB OS. 1. Download the MAXHUB Log Tool Download the MAXHUB-LogTool-v.17. You can find the link here. 2. Run the StartupCollect Once you have downloaded the above ZIP file and extracted the contents, run the startup file as shown below: 3. Collect the logs Please note that step 2 in this process can take around 5 minutes to complete. 4. Share the logs Send the logs to support@ascentae.com to log a support ticket. In order for us to assist you quicker, please provide: Device model Serial number Current firmware version Date purchased from Ascentae 5. Resource Centre MAXHUB has a useful resource centre that you can use to find answers to your questions.  Check it out here.     details { border: 0px solid #aaaaaa; border-radius: 4px; padding: 0.5em 0.5em 0; width: 100%; } summary { font-weight: bold; font: roboto; color: white; margin: -0.2em -0.2em 0; padding: 0.1em; border-radius: 15px; background-color: #3f484d; padding: 15px; width: auto; height: auto; } summary::after { content: url("data:image/svg+xml,%3csvg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 16 16'%3e%3cpath fill='%23ffffff' d='M1.646 4.646a.5.5 0 0 1 .708 0L8 10.293l5.646-5.647a.5.5 0 0 1 .708.708l-6 6a.5.5 0 0 1-.708 0l-6-6a.5.5 0 0 1 0-.708'/%3e%3c/svg%3e"); background-repeat: no-repeat; background-position: center; background-size: contain; color: #ffffff; width: 20px; height: 20px; margin-left: 5px; float: right; } details[open] summary::after { content: url("data:image/svg+xml,%3csvg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 16 16'%3e%3cpath fill='%23ffffff' d='M7.646 4.646a.5.5 0 0 1 .708 0l6 6a.5.5 0 0 1-.708.708L8 5.707l-5.646 5.647a.5.5 0 0 1-.708-.708z'/%3e%3c/svg%3e"); float: right; } details[open] { padding: 0.5em; } details[open] summary { margin-bottom: 0.5em; background-color: #35abe5; }

Jupiter have issued a BIOS update to support the Trusted Platform Module 2.0 to be enabled on the OPS module.TPM2.0 is a prerequisite for Windows 11.Update Process1) On the OPS PC, ensure you are logged in with administrator rights2) Download the OPS11 BIOS update from the Software Downloads page of the Jupiter support site (Jupiter.com/support)3) Run the update which will install and restart WindowsChange BIOS Settings1) Ensure a keyboard is attached to the OPS module2) Reboot OPS3) Press ‘ESC’ on keyboard on restart to enter BIOS4) When in the BIOS menu, go to ‘Security’, ‘TPM Operation’ and Enable5) You will also need to enable ‘Secure Boot’6) Hit ‘F10’ to save settingsConfirm TPM Enablement1) Exit BIOS and boot OPS back into Windows2) In the ‘Run’ dialogue box, type ‘tpm.msc’ to confirm that TPM is enabledOnce these steps are complete, you will be able to upgrade to Windows 11.If in doubt, ask AscentaeWe are here to help. If you have any questions or concerns about a solution, please contact the Support Team at support@ascentae.com.

Here's a simple guide to factory resetting your GoBright Interact.With a small screwdriver or a paperclip you can press the reset button for 5-10 seconds.Let the device fully reboot. You'll then need the GoBright app to scan the QR code shown on screen and link the Interact to the relevant desk / room.The GoBright app is available for free on both Apple and Android devices. Just check out your relevant app store and search for 'GoBright'.

From the 6th of November 2024, it's now possible to add a buffer time for both before and after a meeting. This needs to be enabled in the profile that is linked to the room.You need to be an administrator to configure this option.1. Head to Settings > Rooms > Profiles and select the relevant profile you would like to update2. If you have more than one, select the profile that needs to be updated so that approval is required:3. Enter your desired times for before and after a meetingIf you try to book the room that violates the buffer, you will get the following error:Multiple email addresses can be added for notifications. Separate these with a comma.This can be coupled with Services - e.g. services to request a change of the layout of the room or deliver food and drink prior to the meeting.For any assistance, please contact support@ascentae.com.

Cable length: 1.5mThe cable will arrive in the packaging as illustrated.We have tested the cable with the following specifications:230V mains (UK) plug to USB-C adapterInput 100-240V50-60 HzOutput 5.0V / 3.0A / 15.0Wor9.0V / 2.77A / 25.0WBoth scenarios power up the Interact.As well as a 230V mains power adapter, we've also tested the following using a USB-C port: The USB-C port shown above has a maximum of 3A.The DC side is plugged into the Interact and the USB-C side is plugged into your adapter of choice.