Ascentae
Your current date and time:
Search All Vendors

Ascentae Technical Resource Hub

Have A Question?

Ctrl+Alt+Defeat The Chaos

gobright iadea biamp lenovo nuiteq ptzoptics Rocware Mersive maxhub logo rethink jupiter utelogy audiebant ProDVX Nureva gobright iadea biamp lenovo nuiteq ptzoptics Rocware Mersive maxhub logo rethink jupiter utelogy audiebant ProDVX Nureva
Sort:

Found 6 results

Installation 5 months ago

Nureva HDL410 – Best Practice for Camera Integration Direct Integration

Nureva HDL410 – Best Practice for Camera IntegrationDirect Integration Before installing a camera steering and switching solution to integrate with your Nureva audio solution, we recommend you refer to the below information and important links.You can find comprehensive instructions on installing and configuring a Nureva / camera solution on the Nureva Support site.This article gives guidance you may not find online, plus some Top Tips that we have picked up.Understand the customer requirementsNureva can support both camera steering (tracking/switching presets), and camera switching (changing to different cameras).It is important to have a view of the customers room, and understand which areas of the room need to be covered by a camera.  From this, you can determine the number of cameras required and the fields of view.If you have any queries about this, please contact Ascentae for advice.  We can even offer a full pre-installation consultancy service to help with this.Understand the limitations of the technology – HDL300 / HDL310         When integrating with a HDL300 or HDL310, you have a single sound bar – and so only one point of reference.  The information passed to the camera controller is based on the central point of the sound bar.  This makes it an ideal solution for azimuth presets, with a single camera mounted in line with the centre of the sound bar.Typically, up to 8 presets can be configured, each covering 22.5° of the room.The same is true if you have the legacy Dual HDL300 system.  The reference point for camera tracking will be the centre point of the primary sound bar (plugged into port 1 on the Connect Module).  The 2nd sound bar is not used for camera tracking).If using more than one camera, the best position for the cameras is either side of the sound bar, each covering half the room and using 4 presets.Understand the limitations of the technology – HDL300 / HDL310The HDL410 has 2 sound bars and when correctly positioned in the room, they can deliver accurate X,Y coordinate information to the camera controller.  Depending on the sophistication of the camera controller, it can interpret those coordinates in different ways.                Select appropriate camera and steer to coordinate location                Select appropriate camera and steer using presets                Select appropriate camera and switch to pre-defined zoneNote:  Not all camera controllers support all these modes.  Refer the camera vendor documentation for details.Camera zoning is covered in detail in a separate knowledge base article.Choosing the correct cameraNureva have created a suite of API calls which different camera providers have utilized to integrate with the Nureva devices.  Currently these are Aver and Lumens, plus drivers and sound tracking modules by Crestron and Extron.Typically, each camera vendor has created a software camera controller (in some instances it may be a hardware device).  Nureva confirm compatibility with the camera controller.  However, not all cameras from a specific vendor will be supported on the controller software.  It is the responsibility of the integrator to confirm compatibility of cameras and camera control solution.Make sure you check the focus length / zoom capabilities of the proposed camera.  If you are installing in a large room, the camera should be able to zoom and focus clearly on the furthest participant.Currently supported camera drivers are as follows.Note that camera switching is not supported by PTZApp 2 (single camera only)Note that camera switching is not supported by CamConnect Lite (single camera only)Cameras that support preset recall and have a Crestron module can support sound location data.Cameras that support preset recall and have an Extron driver can support sound location data.Positioning of the Nureva Sound BarsFor the HL300 / HDL310 remember that the camera reference point is the centre of the sound bar.The ideal position for the sound bar is above the screen – allowing sufficient clearance for the audio to be reflected off the wall into the microphones.It is important that there is no obstruction underneath the sound bar as this will degrade audio quality and cause inaccurate sound location data.To ensure best audio performance, measure how far your screen sits from the wall, and mount the sound bar so the bottom is 1.5 x this distance.E.g.  if you screen sits 10cm proud of the wall, the bottom of the sound bar should be 15cm from the top of the screen.Refer to the Microphone clearance requirements guide for more detailshttps://support.nureva.com/docs/installation-hdl300-microphone-clearance-requirements-and-recommendations-2We recommend that cameras are mounted underneath the screen where possible, but if underneath HDL sound bar, allow at least 6” (15cm) clearance from the top of the camera to the bottom of the sound bar.Available ResourcesSupported camera solution - https://support.nureva.com/docs/supported-integrations-for-camera-switching-and-tracking-1Aver Integration Instructions - https://support.nureva.com/docs/integrate-aver-cameras-with-camera-trackingLumens Integration Instructions - https://support.nureva.com/docs/how-to-integrate-with-lumens-ptz-camerasCrestron Module Instructions - https://support.nureva.com/docs/use-crestron-sound-tracking-moduleExtron Driver Instructions - https://support.nureva.com/docs/using-extron-sound-tracking-driverWatch out for reflectionsCameras are dumb and can easily be confused by reflections in windows.Be mindful of setting presets that can catch reflected images, or setting the camera to track in areas where windows will reflect if it’s dark outside.Ideally, curtains or blinds will not only avoid this issue, but have the additional benefit of reducing echo and reverberation in the room and so improve performance of the HDL device.If in doubt, ask AscentaeWe are here to help.  Please ask if you need any guidance, or would like to engage us to do a consultation on HDL and camera integration.
102 hits
Nick Palmer (@nick) February 8, 2026
Read More
Installation 5 months ago

Nureva Audio - Camera Zoning Guide

Nureva HDL410Best Practice for Camera Zoning Before installing a camera zoning solution to integrate with your Nureva audio solution, we recommend you refer to the below information and important links.You can find comprehensive instructions on installing and configuring a Nureva / camera solution on the Nureva Support site.This article gives guidance you may not find online, plus some Top Tips that we have picked up. Understand the customer requirementsWhen integrating the HDL410 for camera zoning, you can install up to 3 cameras covering different areas of the space.A typical use case may be a presenter / audience configuration, with a camera facing the front of the room for presentations and another 1 or 2 covering the audience.We also see this in use in larger meeting rooms where a single camera struggles to cover the entire room.If you have any queries about this, please contact Ascentae for advice.  We can even offer a full pre-installation consultancy service to help with this. Understand the limitations of the technologyThe HDL410 will deliver X,Y co-ordinates to an Inogeni Cam230 camera switcher, enabling it to switch to a camera relating to a specific zone in the room.It is then a function of the camera to Pan, Tilt and Zoom within that zone.  Additional camera software may be required to enable this.Zones cannot overlap – or be too close together – as this could result in the cameras switching incorrectly.Both the HDL410 and Inogeni CAM230 MUST be connected to a network and the HDL410 MUST have internet access and be enrolled in Console Cloud.Choosing the correct cameraThe Inogeni CAM230 allows up to 3 cameras to be integrated – 2 USB and 1 HDMI.  Alternatively, a 3rd USB camera can be supported using the Inogeni U-CAM convertor.This gives great flexibility and allows different types of camera to be used depending on the application.For example, a framing camera (such as Huddly L1) could be used to accurately frame a presenter as they move around the front of the room and a PTZ camera could be used for the audience.  A 3rd, static camera could be trained on a whiteboard to capture the content when someone is writing on the board.Positioning of the Nureva Sound BarsIt is strongly recommended that the 2 sound bars are mounted on opposite or adjacent walls to provide the most accurate sound location data. As with all installations of Nureva sound bars, ensure the sound bars are not mounted directly above a screen or other obstruction.We have found that any obstructions underneath the sound bar can cause problems with accurate sound location data, so ideally they should be mounted with nothing underneath them.  However, if this is not possible, refer to the Microphone clearance requirements guide for details on how to install.https://support.nureva.com/docs/installation-hdl300-microphone-clearance-requirements-and-recommendations-2   Creating camera zonesBe aware that unless your room is acoustically perfect, X, Y coordinates will always have a margin for error.Ideally, make your zones generous and leave at least 50cm gap between them.  If zones are too small, or too close together, in room echo can cause inaccuracies and cause the camera to switch unnecessarily.It is generally better to have the system revert to the default camera than to focus on the wrong person or continually switch cameras if someone is sat on the edge of 2 zones which are too close together.Watch out for reflectionsCameras are dumb and can easily be confused by reflections in windows.Be mindful of setting presets that can catch reflected images, or setting the camera to track in areas where windows will reflect if it’s dark outside.Ideally, curtains or blinds will not only avoid this issue, but have the additional benefit of reducing echo and reverberation in the room and so improve performance of the HDL device.If in doubt, Ask AscentaeWe are here to help.  Please ask if you need any guidance, or would like to engage us to do a consultation on HDL and camera integration.Available ResourcesInogeni Integration FAQ’s - https://support.nureva.com/docs/technical-faqs-hdl410-and-inogeni-cam230Inogeni Integration Guide - https://support.nureva.com/docs/integration-guide-hdl410-and-cam230
66 hits
Nick Palmer (@nick) February 8, 2026
Read More
Pre-Sales 2 weeks ago

Nureva HDX Series - Pre-Installation Considerations

IMPORTANT NOTE:  This is a summary of the full HDX User Guide, provided by Nureva.  We strongly recommend that you read this in full prior to purchase / installation of any HDX system.This overview is provided by Ascentae as a basic guide of what to look for to ensure a smooth installation of HDX systems in a typical deployment.  As such, advanced functionality such as integration with 3rd party subwoofers, Adaptive Voice Amplification and Adaptive Voice Lift are not included in this overview.  Additional guidance for these scenarios can be found in the full HDX User Guide.For the purposes of this overview, all rooms are considered to be regular shape.  For details of options in irregular shaped rooms, refer to the full guide.As this guide is provided as a pre-installation reference, it does not cover the installation process.  Details of installation best practice can be found in the full guide or on the Nureva support site – support.nureva.com.  The full HDX guide can be found here - https://www.nureva.com/user-guide/hdxHDX OverviewThe Nureva HDX series is a mutli-component audio system which is suitable in spaces up to 223m2. It consists of 3 elements – Providing full range distributed audio, adaptive voice lift, adaptive voice amplification, full room microphone coverage, assisted listening via Auracast and full connectivity to UC platforms (Teams, Zoom etc). The HDX series offers 5 modular configurations, consisting of 3 components.System Hub All in one system eliminating need for separate DSP’s, amps and Bluetooth transmitters -          AV-over-IP for single cable installation -          Bluetooth audio streaming -          Auracast broadcast audio -          Intelligent compute features including camera tracking, controller integration & device management -          Passive cooling for quiet operation Sleep mode for energy conservationAudio Bars Speakers / microphones combined in single, easy to install unit to support distributed audio. -          Full range distributed audio and full room microphone coverage -          2-way speaker system with tweeter & dual woofer -          2 dimensional microphone array -          Single Ethernet connection to hubFlexible horizontal or vertical installation-      Flexible horizontal or vertical installationMicrophone Pod (option) Spports Microphone Mist for improved full room coverage -          2 dimensional microphone array -          Single Ethernet connection to hub -          Flexible installation on wall or ceilingHDX ConfigurationsPrior to purchasing a HDX system consider the following-          Room Dimensions – get accurate measurements of room-          Active locations – note where people speak, seating & presenter areas and if there is a ‘front of room’-          Room environment – consider which physical locations are best for HDX component placement-          Room acoustics – assess reverberation & background noise to determine best placement for HDX components.Coverage for each HDX configuration is based on the length of the longest wall.  For rooms with a more complex geometry, consider a larger configuration or add microphone pods to provide best coverage.-          2 HDX Audio bars are suitable for rooms up to 91.m in length-          4 HDX Audio bars are suitable for rooms up to 18.3m in length -          Microphone pods can be added to extend pickup coverage and support Adaptive Voice LiftHDX Placement Guidelines In order to provide best audio coverage in any given space, follow these principles: 1.       Maintain a clear line of sight between audio bars & microphone pods.  The system performs best when they have a clear, unobstructed view of each other and the room. 2.       Avoid obstacles.  Avoid placing components behind pillars, inside alcoves and in recessed areas. 3.       Stay clear of noise sources.  Position components away from HVAC vents, fans and other equipment that produces continuous background noise.Audio Bar PlacementAudio bars can be mounted horizontally or vertically on the wall using the supplied mounting bracket, or on VESA standard mounting solutions (display mounts, floor stands, mobile carts etc).Firstly, consider whether the space has a defined ‘front of room’ as this is the natural focal point of a meeting or presentation where audience attention is focused.2 Audio Bar Solution Ideally, for rooms with a defined front position, place 2 audio bars along this wall, evenly distributed (¼ and  ¾ points on along the wall) to provide balanced audio for both presenters and audience.For spaces without a defined ‘front of room’, the optimal positioning should be on the same long wall.For more details, refer to HDX User Guide - https://www.nureva.com/user-guide/hdx/placement4 Audio Bar SolutionUse a balanced, symmetrical layout to provide consistent coverage across the room. For spaces with a defined ‘front of room’, there are multiple options for positioning.For spaces without a ‘front of room’ the bars should be positioned evening along the long walls to provide consistent coverage.Audio Bar OrientationHDX Audio bars can be mounted vertically or horizontally.-          Vertical orientation (default) – microphones are positioned in the upper half of the bar, to provide optimal localisation and clarity -          Horizontal orientation – the speaker drivers need to be positioned towards the outer edges of the room for even sound distribution.  This works best when working around windows and other obstacles. Guideline Measurement Why this helps Suggested height from floor 91 – 366cm Audio bars being placed at or above head level will help direct sound towards listeners and improve microphone pickup. Maintain minimum clearance of 8cm above the audio bars for wall mount installation and service   Minimum distance from adjacent wall or corner 30cm Avoide placing audio bars on walls close to corners to reduce echo.  If corner placement is required, angle the audio bars to face into the room using a VESA standard mounting solution (not provided). Minimum spacing between audio bars 152cm Adequate space between the audio bars helps prevent them playing directly into other components, reducing echo and supporting consistent performance Microphone Pod PlacementOne or two microphone pods may be mounted on the ceiling, wall or VESA standard mounts, depending on room layout, furniture arrangement and location of primary talker.The below layouts demonstrate different placement examples but microphone placement is flexible depending on the use case. Examples – 1 microphone podExamples – 2 microphones podsMicrophone Pod installation Installation is very flexible.  The supplied bracket supports  any orientation is supported except for upside down on a wall.Microphone Pod Mounting Guidelines Guideline Measurement Why this helps Typical ceiling-mounted height 244 to366cm The coverage and sensitivity of the microphones are balanced, helping capture voices clearly Minimum wall mount height 91cm The placement of microphone pods above seated height helps maintain clear pickup. Minimum spacing from audio bars 152cm Adequate spacing between microphone pods and audio bars ensures speakers and microphones are not facing directly towards each other, reducing echo and supporting features such as Adaptive Voice Amplification and Adaptive Voice Lift System Hub Positioning The HDX system hub can be placed on a table, shelf or rack, or wall mounted.  Regardless of placement, ensure adequate ventilation an an unobstructed Bluetooth connection.For optimal placement consider -          Side ventilation: allow at least 56mm of clearance -          Top ventilation: allow at least 86mm of clearance above -          Heat considerations: do not install the system hub near other devices that generate heat.  Ambient temperature must remain below 40°C -          Bluetooth antenna: ensure it is upright for best signal strength.  Antenna extender are not recommended. -          Password and enrolment code are located on the base of the system hub.  Make a note of these prior to final installation of the hub as they will be needed to enrol system into Console. If in doubt, Ask Ascentae We are here to help.  If you have any questions or concerns about a solution, please contact the support team  - support@ascentae.com.
48 hits
Nick Palmer (@nick) July 14, 2026
Read More
Pre-Sales 2 months ago

Nureva HDL - Room Readiness Checklist

HDL OverviewThe Nureva HDL series is the ideal solution for most medium and large meeting rooms.  Installation is quick and easy, and the built-in software automatically calibrates to the room and continuously adjusts to ensure great audio quality.To get the best out of your HDL solution, check these simple steps to ensure the room is ready.The HDL consists of 2 elements.The Connect Module 2 which can be positioned anywhere, but typically will be close to the PC in the roomThe sound bar(s) which need to be carefully positioned to provide optimal performance.The sound bar is 5' (1524mm) long with 16 downward facing microphones and dual speakers.Room SizeIt is not recommended to use HDL systems in spaces larger than the maximum size.  Doing so will reduce microphone performance and audio output levels will be reduced at the extremes of the space and people may struggle to hear.HDL310 – Maximum recommended room size    9.1m x 9.1mHDL410 – Maximum recommended room size    10.7m x 16.8mSound Bar PositioningIncorrect positioning of the sound bar will cause poor performance.  We recommend reading the Nureva guide before purchasing the system.https://support.nureva.com/docs/microphone-clearance-requirements-and-recommendations Here are the key points to checkHeight.  The bar should be positioned between 2.16 and 3.05m from floor level to ensure the microphones are focussed at sitting and standing height.  Too low reduces audio clarity when people are standing.  Too high reduces audio clarity when people are seated.Wall position.  The bar should be at least 1m from a corner to prevent echo.Sources of noiseThe sound bar should not be installed within 1m of a noise source (e.g. HVAC unit).  If the HVAC is blowing directly onto the sound bar, allow at least 1.5m clearance.Sound bar clearance.  The HDL sound bar has downward facing microphones to detect both direct audio pickup AND audio reflected from the wall behind.  It therefore imperative that the bar is positioned flush on the wall with no obstructions immediately underneath.If the sound bar is to be mounted above a screen (or other obstruction), measure the depth of the screen from the wall (Y).  To calculate the height of the bottom of the sound bar (X), multiply this by 1.5.X = Y x 1.5     So if a screens sits 10cm from the wall, the bottom of the HDL sound bar should be 15cm from the top of the screen. If the unit is mounted above an alcove (or window), there must be at least 15cm of clear wall underneath the sound bar.     Wall construction.  The HDL works best when placed on a hard, flat surface.  Avoid glass as it is overly reflective.     Acoustic panelling.  The HDL sound bar must never be mounted directly onto an acoustic panel.  Audio will be absorbed by the panel and mic pickup will be poor.  Either remove a section of acoustic panel to seat the sound bar – with sufficient clear wall underneath, or install a backboard on top of the acoustic panel Room AcousticsPrior to installation, we recommend that you test acoustic levels in the room.  Nureva have included tools for this in their iPhone App (available from  App Store).  By testing background noise and reverberation in the room, you can determine suitability of the HDL for your space.Background noise.  Normal human speech is approx. 60 – 65dBA.  The HDL priorities human voice, partly by distinguishing the different dB levels.  Therefore, recommended background noise should be 40-45dBA for optimal performance.Reverberation (echo).  The HDL includes sophisticated algorithms to eliminate echo.  However, if the room is too reverberant, the algorithms will not be able to compensate.Take a reverberation reading to determine whether echo is too high.  If Reverberation Time (RT60) levels are higher than 0.5 seconds, then acoustic treatment in the room should be considered before installing a HDL systemCable RunsThe Connect Module 2 and sound bar are connected via a Cat6 Power over Ethernet cable, so connection is easy.  However, make sure you have the ability to run the cable to the sound bar installation spot.The CM2 can be mounted anywhere in the room, typically behind the screen or in a rack, allowing for simple cabling to the rest of the AV equipment.We strongly recommend using the cables included in the box and connecting the CM2 directly to the in room computer and not using a USB hub as this can introduce latency.OverheatingThe Connect Module 2 requires good ventilation to prevent overheating.  If it is mounted behind the screen, ensure it is at the edge to provide air flow.  Do not mount it so it is receiving heat output from other devices. If there are issues with any of the items on this list, please contact Ascentae support and we will endeavour to find a solution that works for you and your customer.  By doing this prior to installation we can ensure that both you and your customer get the best possible solution and minimal downtime and inconvenience.       If in doubt, Ask Ascentae We are here to help.  If you have any questions or concerns about a solution, please contact the support team  - support@ascentae.com.
36 hits
Nick Palmer (@nick) May 20, 2026
Read More
Pre-Sales 5 months ago

Flexible Multi-Camera Meeting Space - Sample Solution

Solution Overview Multi-Camera SolutionFlexible meeting spaces require flexibility solutions to maximise performance.  A front facing camera may be suitable for regular meetings, but for presentation or teacher / student interaction, additional AV equipment should be considered. There are a number of solutions on the market which offer camera switching, but these can dramatically increase the price of the solution for minimal additional performance.For many spaces, all that’s required is multiple camera, and the ability to switch between them easily.  The addition of a ReThink AV auto switching matrix allows both the in-room PC and guest laptops to access the AV and simply switch to the desired camera within the UC client (Teams/Zoom etc). For additional ease of use, the matrix can be programmed to switch sources on a keyboard shortcut or integrated into a room control system. Up to 5 USB peripherals can be configured and dual screen output is fully supported to allow maximum performance and flexibility. Optionally, wireless sharing can be integrated with the in-room PC.  We recommend AirServer or Mersive solutions, or for customers who want to use a wireless dongle, the Maxhub WB05 provides wireless sharing without the need to install software or connect to a wifi hotspot.Key Benefits- One-touch join of Microsoft Teams meetings- Easily switch between USB peripherals within your UC client, via keyboard shortcut or via control system- Up to 5 USB peripherals can be installed- Dual screen support- Bring Your Own Meeting support connects screen and peripherals.  Host the meeting on your computer.- Auto switching to your computer as soon as you plug in- Single USB-C connects your computer for video, audio, data and network*.  Plus, it charges your battery!*Wired network connection required to ReThink switch. ·        Core Components-  Dual Maxhub ND65 CMA 65” displays ·        -  Huddly C1 All-in-one camera / mic / speaker system ·        -  Additional cameras (RocWare RC821 shown) ·        -  Additional audio system (if required – Nureva - HDL310 shown) ·       -  ReThink AV MatrixRAV-MS-4x2DLHU-Tx/Rx - ReThink active USB-C cableOptional Components for wireless sharing-  Mersive POD v4- AirServer Connect 3- MAXHUB WB05 + buttonThis example includes dual screens and a MAXHUB XCore Pro MTR.A Huddly C1 is provided for front of room camera and meeting audio.When switching to presenter mode, the RocWare RC821 PTZ camera is mounted at the rear of the room to capture the presenter.A Nureva HDL310 is included to provide whole room audio in presentation mode.A wireless keyboard & mouse are installed to allow quick switching between setups. The Mersive POD 4 provides wireless sharing via the MTRA USB-C cable connects to the ReThink matrix to allow laptops to access the solution and enable BYOM or local presentation.Connection Diagram
12 hits
Nick Palmer (@nick) February 16, 2026
Read More
Pre-Sales 5 months ago

Recommendations For Driving Jupiter Ultra-wide Screens

Supported DevicesIn order to get best performance from your Jupiter screen, it is important to use devices that are capable of supporting 21:9 resolutions.  The Jupiter screen natively supports 5120 x 2160 @ 60Hz (5K60).  Lower resolutions are supported and depending on the application can be displayed natively – with black borders – or stretched horizontally and vertically to fill the screen.  Refer to the Jupiter user manual for details.The following guidelines are based on testing by Jupiter.  They are not intended to provide a comprehensive list of supported devices.  Please check the specifications of the devices you intend to use.The Jupiter OPS module is designed to support Jupiter screens at full 5K60 resolution.PC’s with Graphical Processing Units (GPU)Older PC’s with onboard GPU’s over 3 years old will not support 5K resolution, but are likely to support a 4K variation of 21:9 aspect ratios – 3440 x 1440, 3840 x 1620, 2560 x 1080).Newer Intel models (less than 2 years old) support 4K60 and may support 5K30.Models with Nvidia GPU chipsets / software generally support software to create custom resolutions (including 5K60 21:9).Latest Intel models present no issues.Current Intel model computers with on-board GPU’s which support 5K+ monitors:i7 - 11th Generation Intel® Core™ i7 Processors, Processor Graphics, Intel Iris Xe Graphicsi5 - 11th Generation Intel® Core™ i5 Processors, Processor Graphics Intel UHD Graphics 750i3 - 12th Generation Intel® Core™ 13 Processors, Processor Graphics Intel UHD Graphics 730Separate GPU’sMost newer GPU’s cards should work.  Check the specification to ensure it supports 5KNVidea® software and hardware allows custom resolutions to be created should they not be supported by the OS.Apple® GPUsThe newer Apple M1 chip equipped machines have no issues driving 5K resolution monitorsCertain OS builds do not expose the 5120x2160 resolution, despite it being supported.  We recommend 3rd party software to set a custom resolution.Other AV Hardware (Extron, Crestron, TvOne, Brightsign etc)None of the AV hardware options we have tested currently support native 5K60 Support for MTR / Zoom Room systemsFront Row support on MTR’s is not dependent on support for 21:9 resolutions, and older generation MTR hardware will only support 16:9 resolutions.  If your MTR is older than 2 years, you may only be able to support 21:9 aspect at low resolutions (2560 x 1080).If you are attach a Jupiter screen to an existing MTR, please check the specification to ensure it will support 21:9 resolutions.Latest generation MTR systems should support 21:9.  We have tested the Lenovo ThinkSmart Core family which fully support 21:9 at 4K resolution.Zoom can support 21:9 resolutions to their latest software, but please check that your Zoom Room hardware is capable of supporting 21:9 resolutions.Supported CablesHDMI will not support 5K60.  Most systems connected via HDMI will support a maximum of 4K60.To get full 5K60 resolution, DisplayPort 1.4 or better is recommended.  Where possible, look for DP8K certification to ensure compatibility.USB Type C (Thunderbolt) is also supported for 5K60 and will also provide touch control without the need for a separate cable.  Passive Thunderbolt cables can only run for a maximum of 3m.  Optical USB-C cables can be expensive, but will allow cable runs of up to 15m.For longer cable runs, DisplayPort and separate USB-B cable for touch control is recommended.USB Device Pass ThroughThe Jupiter screen includes a USB hub, enabling you to attach USB-A peripherals and signal to pass via the screen to both the internal OPS and any attached PC (external PC connected via USB-C or USB-B).We have thoroughly tested this functionality with Lenovo ThinkSmart Core PC’s (MTR and OEM versions), Huddly cameras and Nureva audio products.
6 hits
Nick Palmer (@nick) February 8, 2026
Read More
Can't find it here? Click here to give our extended vendor search a shot for a deeper dive