Ascentae
Your current date and time:

Ascentae Technical Resource Hub

Have A Question?

Ctrl+Alt+Defeat The Chaos

gobright iadea biamp lenovo nuiteq ptzoptics Rocware Mersive maxhub logo rethink jupiter utelogy audiebant ProDVX Nureva gobright iadea biamp lenovo nuiteq ptzoptics Rocware Mersive maxhub logo rethink jupiter utelogy audiebant ProDVX Nureva
Sort:

Found 3 results

Installation 1 month ago

Removing The GoBright App - ProDVX Panels

Dictate the summary of this article: Your browser does not support the audio element. If your ProDVX panel has GoBright pre-installed but you have no requirement to use this application, you can remove it from the panel.Completion Time: ~5-10minsFire up the panel and wait for the GoBright application to load. You will be presented with an activation code. Ignore the activation and perform the following gesture on screen to exit the kiosk. Removing your finger after each motion: This now takes you into the Android settings interface. You will not be prompted for a PIN as the device has not been activated.Under the Device section, select Exit and confirm the pop-upSwipe down twice / three times from the top of the screen and press the settings cogFind the Device section, select Apps and then find GoBright - Device Select this option and select Force Stop. On the same page, press Uninstall and confirm the pop-up. Now, on the bottom toolbar, press the triangle back icon 2 or 3 times to return to the home screen.After the above steps above have been carried out, GoBright has been uninstalled and you have a blank ProDVX panel.Now use the devices web browser to download the .apk file of your choice and install the relevant package. You also have the option of installing the .apk file from a USB device.Important: If you’re using a USB device, it must be formatted as FAT32. NTFS is not supported.If you have any questions, please log a support ticket by contacting Ascentae Support.     
24 hits
Lee Russell (@lee) June 4, 2026
Installation 1 month ago

ProDVX Firmware Re-Flash

If the device powers up as expected, but is stuck on the Android boot screen, please follow these steps to re-flash (factory reset) the ProDVX panel. You will need to re-install the relevant booking app after performing the following steps.Unplug everything from the device, including the power source.Press and hold the "Volume +" button.Whilst holding this button, provide power to the device (can be both PoE or PSU).Keep holding the button until the Android Recovery menu appears. In this menu, navigate using the volume (+/-) buttons to the format/wipe system option.Select this option by long pressing the circular menu button next to it.After confirming the reset, reboot the device and check and confirm whether it does so without any issues.After step 7, please be patient as it can take up to 10 minutes for the panel to reload. When the process is complete, you'll have a blank Android panel. As this process completely resets the panel, you'll need to reconfigure the network - so if you're using Wi-Fi you will need to re-authenticate.If you have any further questions, please contact support@ascentae.com to log a support ticket. It helps to speed things up if you provide:ModelSerial NumberProof of Purchase
18 hits
Lee Russell (@lee) June 22, 2026
General 5 months ago

Pogo NFC reader for ProDVX

If you're experiencing issues with NFC cards not being recognised on the Pogo module, please download and install this file:Download File (1.5M)The file will need to be placed in the root directory on a USB drive that's formatted as FAT32.If you don't have a USB drive to hand, you can download the file on the browser and run the .apk from the downloads section.If you decide to download and use a USB, once the USB is inserted, swipe down from the top and select the name of the device. Run the.apk, give all permissions, and then reboot the panel after the installation is complete.Please also ensure that the PINs are correctly aligned, and the screws are secure.We have tested this add-on in one of our Experience Centres (Model: APPC-32X) and it's got the Ascentae seal of approval.
12 hits
Lee Russell (@lee) February 8, 2026
Can't find it here? Click here to give our extended vendor search a shot for a deeper dive